Facilities

GONDAN is integrated in an environmentally protected area in the Eo River estuary.
It has three facilities located in the town of Castropol (Asturias, Spain). The main shipyard is located in the port of Figueras, while the steel-cutting workshop and large equipment warehouse are in Barres Industrial Park.
Altogether, our facilities cover an area of 43,000 m² and have the capacity to process 3,000 MT of steel a year.
MAIN FACILITIES
Most of the work involving steel production, hull assembly, assembly, construction and outfitting is done in Figueras.
The Technical Office and Administration, Sales, Procurement and HR Departments are also located here.
facilities
slipway 1 slipway 2 outfitting quay sandblasting workshop offices flat panel workshop piping workshop block workshop

slipway 1

slipway 2

outfitting quay

sandblasting workshop

offices

flat panel workshop

piping workshop

block workshop

DESCRIPTION OF OUR FIGUERAS PORT FACILITIES

• Total area: 28,000 m²
• Covered Area: 8,700 m²
• Area of offices and miscellaneous warehouses: 744 m²
• Outfitting area: 7,215 m²
• Length of outfitting quay: 190 m

Two slipways for building vessels up to 100 m in length with a beam of up to 22 m.

Workshops:
• Block prefabrication and advanced outfitting
• Flat panel prefabrication and steel plate bending
• Piping construction and bending. Piping warehouse.
• Carpentry
• Mechanical
• Sandblasting and painting cabinet
• Electrical maintenance

GONDAN

Puerto de Figueras, s/n
33794 Castropol

Asturias, SPAIN

Tlf. +34 985 63 62 50
Fax. +34 985 63 62 98
gondan@gondan.com

GPS: 43º32’18”N,-7º1’24”W
43.5384,-7.0233

GRP DIVISION

On our premises in Castropol we have a 3,000 m², 14.5 m high industrial plant situated on a 5,000 m² lot.
Production at this plant is focused on building passenger vessels and workboats (patrol boats, pilot boats,
port service vessels, fishing boats, etc.), made of resins and fiberglass and work catamarans made of GRP,
with no technical limitations, up to 34 meters in length.

Outfitted with all the necessary tools and equipment, it has an area which is isolated from the rest of
the facility equipped with two heating systems to regulate temperature and humidity: a radiant floor
heating system for the lower part of the building and a hot air system for above. It also has a dual
styrene fume and dust extraction system and is equipped with resin sprayers and a vacuum pump for laminating
by vacuum infusion.

Despite being a relatively new division, it has been staffed with professionals who have over 20 years of
experience in the sector, in both ship design and production as well as in the construction of models and
molds. This is how our extremely light, yet sturdy boats built with state-of-the-art materials are able
to meet the highest in quality standards. GRP Division and its facilities are included in the three
certifications – ISO-9001, ISO-14001 and OSHAS-18001 – which the company holds for the construction of steel,
fiberglass and aluminum vessels.

División Fibra GRP
GONDAN -GRP Division

Muelle de Vegadeo
33778 Castropol
Asturias, SPAIN

Tel. +34 985 476 630
ape@gondan.com

GPS: 43º32’17.5’’ N, 7º01’26’’ W
43.538192, -7.023920

CUTTING, BENDING AND WAREHOUSES
Our warehouses and cutting and bending workshops are located in Barres Industrial Park.
Specifically, they consist of:
Steel warehouse + steel-cutting workshop
Profile warehouse + profile cutting and bending workshop
Outfitting materials and equipment warehouse
facilities 2

Barres-foto-01
GONDAN – Cutting, Bending and Warehouses

C/Regueira (70,73 78,81)
Pol.Industrial Barres
33794 Castropol
Asturias, SPAIN
gondan@gondan.com
GPS: 43º31’54.6”N,-6º59’17.6”W 
43.5317,-6.9880

Uso de cookies

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.

ACEPTAR
Aviso de cookies